SIP URI
Description Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com
", "2405551111_1".
Note
• When registering using a user ID that is not a phone number,
you should use this setting.
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com
"
in the example above) can contain up to 316 characters.
Value Range Max. 384 characters
Default Value Not stored.
Configuration File Reference SIP_URI_n (Page 242)
T1 Timer
Description Specifies the default interval, in milliseconds, between transmissions of
SIP messages.
Value Range
• 250
• 500
• 1000
• 2000
• 4000
Default Value 500
Configuration File Reference SIP_TIMER_T1_n (Page 249)
T2 Timer
Description Specifies the maximum interval, in seconds, between transmissions of
SIP messages.
Value Range
• 2
• 4
• 8
• 16
• 32
Default Value 4
Configuration File Reference SIP_TIMER_T2_n (Page 250)
126 Administrator Guide Document Version 2015-07
4.5.2 SIP Settings [Line 1]–[Line 6]
To Next Page
Loading...
