IPv6 Address (Group 1–5)
Description Specifies the IPv6 address for multi-cast paging for each channel
group. {Priority: Group 5 > Group 4 > Group 3, Group2, Group1
(depending on the configuration)}
Value Range FF00::/8
Default Value Not stored.
Configuration File Reference MPAGE_IPV6_ADDRm (Page 228)
Port (Group 1–5)
Description Specifies the port number for multi-cast
paging for each channel group.
Value Range 0–65535
0: Disable
Default Value 0
Configuration File Reference MPAGE_PORTm (Page 228)
Priority (Group 1–3)
Description Selects the priority of the low priority channel group.
The priority of multi-cast paging group1
-3 is lower than the talking.
Priority 4 is higher than Priority 5.
Value Range 4, 5
Default Value 5
Configuration File Reference MPAGE_PRIORITYm (Page 229)
Label (Group 1–5)
Description Specifies a label for each channel group.
Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference MPAGE_LABELm (Page 229)
Enable Transmission (Group 1–5)
Description Selects the sending multi-cast paging.
Value Range
• Yes
• No
Default Value No
90 Administrator Guide Document Version 2015-07
4.3.5 Multicast Paging Settings
To Next Page
Loading...
