Panasonic KX-HDV230 - General Information on the Configuration Files; Configuration File Parameters

Parameter Name Ref.
LOGGING_LEVEL_SIP
Page 311
LOGGING_LEVEL_TR069
Page 311
LOGGING_LEVEL_STUN
Page 312
LOGGING_LEVEL_NW2
Page 312
LOGGING_LEVEL_CFGPARSE
Page 312
*1
This setting can also be configured through other programming methods
(phone user interface programming or Web user interface
programming).
*2
This setting can also be configured through the Web user interface.
*3
This setting can also be configured through the Phone user interface programming.
5.2 General Information on the Configuration Files
5.2.1 Configuration File Parameters
The
information on each parameter that can be written in a configuration file is shown in the tables below. The
information includes parameter name (as the title of the table), value format, description, permitted value range,
default value of each parameter, phone user interface reference, and Web user interface reference.
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Note
• Certain parameter names end with
"_n". This signifies that these settings can be made to each line
individually. The number of lines available varies depending on the phone being used, as follows:
– KX-HDV230: 1–6
Value Format
Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite
form such as "Comma-separated Integer" or "Comma-separated String".
• Integer: a numerical value, described as a sequence of numerical characters, optionally preceded by a
"-" (minus)
An empty string is not allowed.
• Boolean: "Y" or "N"
• String: sequence of alphanumerical characters
For details about available characters, see 5.2.2 Characters Available for String Values.
• Comma-separated Integer: a list of integers, separated by commas
No space characters are allowed.
• Comma-separated String: a list of strings, separated by commas
No space characters are allowed.
• IPADDR: IPv4 address format.
• IPADDR-V6: IPv6 address format (can be abbreviated).
Description
Describes the details of the parameter.
184 Administrator Guide Document Version 2015-07
5.2.1 Configuration File Parameters