Panasonic KX-HDV230 - Page 28

To close the unit’s Web port
1.
2. [ ]/[ ]: "Basic Settings" ®
OK
3. [ ]/[ ]: "Other Option" ®
OK
4. [ ]/[ ]: "Embedded Web" ®
OK
5. [ ]/[ ]: "Off" for "Embedded Web" ®
OK
Configuring Settings from the Web User Interface
To close the unit’s Web port
1. In the Web user interface, click [Web Port Close].
2. Click OK.
Note
• The Web port of the unit will be closed automatically in the following conditions:
– 3 consecutive unsuccessful login attempts occur.
• The
Web port can be set to stay open continuously, through Configuration file programming (® see
"HTTPD_PORTOPEN_AUTO" in 5.3.8 HTTPD/WEB Settings). However, please recognize the
possibility of unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account Target User
ID
(default)
Password
(default)
Password Restrictions
User End users user -blank-
(NULL)
• When
logged in as User, you can
change the password for the
User account (® see 4.4.2 User
Password Settings).
• The password can consist of 6 to
64 ASCII characters
(case-sensitive) (® see
Entering Characters in
1.1.6.4 Accessing the Web
User Interface).
Administrator Network
administrators,
etc.
admin adminpass
• When
logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (® see 4.4.3 Admin
Password Settings).
• The password can consist of 6 to
64 ASCII characters
(case-sensitive) (® see
Entering Characters in
1.1.6.4 Accessing the Web
User Interface).
28 Administrator Guide Document Version 2015-07
1.1.6 Web User Interface Programming