Panasonic KX-TDA100 - Page 130

1.16 Caller ID Features
130 Feature Guide
3. Automatic Caller ID Number Modification
When a call is received, the PBX can automatically modify the caller's telephone number according to
a preprogrammed set of rules (Caller ID Modification Table). This modified number will be automatically
stored in the extension's Incoming Call Log, allowing the extension user to make a call to this number
later without worrying about CO Line Access numbers, area codes, etc.
Each CO line group can be assigned a modification table. Each table has ten formulas for modifying
local/international numbers, and one formula for modifying long distance numbers. When a call is
received, the PBX compares the received telephone number to the area codes programmed under
"Local/International Call Data" first. If a match is not found, the telephone number will be modified
according to the method programmed under "Long Distance Code".
[Programming Example: Caller ID Modification]
Note
When Caller ID information is received from a call on an ISDN line and the call type is International,
National, or Subscriber, the following modification table is used instead of the above table:
Data entered under "Removed No. of Digits" and "Added No." for International, National, and
Subscriber call data will be applied respectively to international, long distance, and local calls.
Incoming Call Log Caller information is automatically recorded in the
call log of the extension which received the call. This
information can be used to view a record of incoming
calls or make calls to any number in the call log.
• 1.16.2 Incoming
Call Log
Features Description Details in
<Modification Table>
[Not
programmable
]
0
0
Local/International
Call Data 10
Long Distance
Code
212
Local/International
Call Data 1
Local/International
Call Data 2
Area Code Removed No. of Digits
Added No.
Modification Table 1
011
3
3
001
0
<Table Selection>
CO Line
Group No.
1
2
Modification
Table
1
3
International Call Data
National Call Data
Subscriber Call Data
Removed No. of Digits
Added No.
<Modification Table>
0
0
0
011
1