Panasonic KX-TDA100

4.7 Configuration [1]
Feature Guide 389
Pre-INS
Assigns the card type to a certain sub-slot (Pre-installation).
Default
Not applicable.
Value Range
MSG4: 4-Channel Message Card
DPH4: 4-Port Doorphone Card
DPH2: 2-Port Doorphone Card
ECHO16: 16-Channel Echo Canceller Card
EIO4: 4-Port External Input/Output Card
Installation Manual References
1.3.1 Options
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Delete
Assigns the card type to be deleted from the sub-slot.
Default
Not applicable.
Value Range
Not applicable.
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
4.7.12 Slot [1-1] CTI-LINK Card Property
The properties of the CTI-LINK card can be specified.
Note that the IP address information must be specified in accordance with the settings of the network that
it will be used on.