Panasonic KX-TDA100

1.1 Incoming Call Features
Feature Guide 31
1.1.3.2 Ring Tone Pattern Selection
Description
A different ring tone pattern can be assigned to each incoming call type, based on the Ring Tone Pattern
Table of the extension.
There are several programmable Ring Tone Pattern Tables. Each table designates a ring tone for intercom
calls, CO line calls, doorphone calls, etc., and each extension can choose its preferred ring tone pattern by
selecting a table.
[Ring Tone Patterns]
[Programming Example: Ring Tone Pattern Table]
LED LED Indication The LED indicator on a PT can indicate the
status of different lines using light patterns and
colors.
• 1.18.3 LED
Indication
Display (Caller
Information)
Display
Information
A user's PT can show a variety of information
on the display, such as the line number, the
caller's name and number, the original
destination if the call was forwarded, etc.
• 1.18.4 Display
Information
External Pager Trunk Answer
from Any Station
(TAFAS)
A pager (loudspeaker) can be used to indicate
when a call is received, useful in noisy or large
workplaces.
• 1.15.3 Trunk
Answer From Any
Station (TAFAS)
Tone/Voice
during a
Conversation
Call Waiting When an extension user is on another call, the
user can be alerted to a new call by a call
waiting tone, or the caller can speak directly
through the user's handset or built-in speaker.
• 1.1.3.3 Call
Waiting
Indication Type Feature Description Details in
1 280 ms
Single
Double
Triple
S-Double
Table
No.
1
2
Timed
Reminder
Call
Back
LCS
Intercom
Call/Hold
Recall
Double
Single
TRG1
Single
Double
TRG... Port 1
Single
Double
Port ...
CO Line Call/Hold
Recall
Doorphone Call
External
Sensor