2.3 System Data Control
250 Feature Guide
2. Time Information from Telephone Company
Time information can be received when
– An incoming or outgoing call through an ISDN line is received/made.
– An incoming call through an analog line with Caller ID which includes time information is received.
The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through system
programming.
Note
If a Timed Reminder (Wake-up call) is set, the setting will not ring or will ring twice depending on
the adjustment.
Conditions
• Station Message Detail Recording (SMDR) will log call information using the PBX clock so that the
logging time will be overlapped at the end of Daylight Saving Time. (→ 1.23.1 Station Message Detail
Recording (SMDR))
Feature References
1.25.4 Timed Reminder
2.3.5 Flexible Numbering/Fixed Numbering
Description
To dial another extension user or to access PBX features, access numbers (extension numbers or feature
numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while a busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialing or talking)
1. Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can be
customized for easy use (→ Flexible Numbering [100]). The numbers must not conflict. It is also
possible to use the default numbering (Pattern 1 or Pattern 2) shown in the following table:
a) Extension Numbers (Extension Numbering Scheme 1 through 32): Extension numbers can
consist of up to four digits. They consist of either a one- or two-digit leading number (0-9 or 00-99)
and a one- or two-digit suffix (0-9 or 00-99). The default suffix is a two-digit number (00-99).
[Example]
If the number "3" is programmed as a leading number for the 1st extension numbering scheme,
and "XX" is programmed as the additional digits, extension numbers 300 through 399 are
available.
b) Feature Numbers: Up to four-digit number consisting of 0–9, " ", and "#"
To Next Page
Loading...
