Panasonic KX-TDA100 - Second Dial Tone [6-4]

4.12 Feature [6]
700 Feature Guide
COS Number
Specifies the COS that applies when making a CO line call with the verified code.
Default
1
Value Range
1–64
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]
Feature Guide References
1.8.5 Verified Code Entry
Itemized Billing Code for ARS
Specifies the itemized billing code used by the ARS feature for identifying calls made with a verified code
for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Programming Guide References
4.14.5 Carrier [8-5]
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
4.12.6 Second Dial Tone [6-4]
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialed after seizing a CO line,
a preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored.