Panasonic KX-TDA100

1.5 Making Call Features
Feature Guide 69
Conditions
• TRS
TRS checks only the dialed telephone number excluding the Host PBX Access code when accessing
the telephone company through the host PBX. (→ 1.8.1 Toll Restriction (TRS))
• SMDR
The Host PBX Access code can be logged by SMDR along with the dialed number when accessing the
telephone company through the host PBX.
• To log by SMDR only long distance calls (not local calls) originated via a specific CO line group, assign
the long distance call code as a Host PBX Access code to the CO line group.
Feature References
1.23.1 Station Message Detail Recording (SMDR)
1.5.4.7 Special Carrier Access Code
Description
If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through
system programming (→ Special Carrier Access Code [303]) is required every time a CO line call is made.
A pause of a preprogrammed length (→ LCOT Pause Time [416]) will be automatically inserted between
the user-dialed Special Carrier Access code and the following digits. (→ 1.5.4.5 Pause Insertion)
Conditions
• TRS
TRS checks only the dialed telephone number excluding the Special Carrier Access code. (→ 1.8.1 Toll
Restriction (TRS))
• If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately—these
codes cannot be assigned together as one code. (→ 1.5.4.6 Host PBX Access Code (Access Code to
the Telephone Company from a Host PBX))
1.5.5 Seizing a Line Features
1.5.5.1 Seizing a Line Features—OVERVIEW
Description
An extension user can select the line that is seized in order to make a call, using one of the following
features.
Feature Description Details in
Line Preference—
Outgoing
A user can select the line seized when going off-hook. • 1.5.5.2 Line
Preference—
Outgoing