1.23 Administrative Information Features
Feature Guide 181
Parameter—Word Length [800], → RS-232C Parameter—Parity Bit [800], → RS-232C Parameter—
Stop Bit Length [800]).
a) New Line Code: Select the code appropriate for the PC or printer. If the PC or printer automatically
feeds lines with carriage return, select "CR". If not, select "CR+LF".
b) Baud Rate: Baud rate indicates the transmission speed of data from the PBX to the PC or printer.
c) Word Length: Word length indicates how many bits compose each character.
d) Parity Bit: Parity bit indicates what type of parity is used to detect errors in the string of bits
composing a character. Make an appropriate selection depending on the requirements of the PC
or printer.
e) Stop Bit Length: Stop bit indicates the end of a bit string which composes a character. Select an
appropriate value depending on the requirements of the PC or printer.
Connection References
2.10.1 Connection of Peripherals
Feature References
1.1.1.3 Direct Inward Dialing (DID)
1.2.2.6 Log-in/Log-out
1.11.1 Call Transfer
1.15.6 Direct Inward System Access (DISA)
1.27.1 TIE Line Service
1.23.2 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be
preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A
message can contain the "%" symbol, which requires a number to be entered in its place when the message
is selected at an extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign
in by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A
connected PC can then be used to generate employee work records.
Conditions
• Up to seven "%"s can be stored for each message.
Feature References
1.23.1 Station Message Detail Recording (SMDR)
To Next Page
Loading...
