Panasonic KX-TDA100 - IP-GW Port [1-10]

4.7 Configuration [1]
432 Feature Guide
INS
Puts the Cell Station (CS) in service.
Default
Not applicable.
Value Range
Not applicable.
Programming Guide References
4.7.26 CSI/F Port [1-9]
Feature Guide References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Programming Guide References
4.7.26 CSI/F Port [1-9]
Feature Guide References
None
4.7.28 IP-GW Port [1-10]
Status of the IP-GW ports can be referred to, or set to INS (in service) or OUS (out of service).
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number