Panasonic KX-TDA100

4.8 System [2]
Feature Guide 539
Send Name to Extension Caller ID
Enables the PBX to send caller's name of an incoming call when sending Caller ID information to an SLT.
Default
Enable
Value Range
Disable, Enable
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
Send Long Distance to Extension Caller ID
Enables the PBX to send a call qualifier (Long Distance) when it is received from a CO line when sending
Caller ID information to an SLT.
Default
Enable
Value Range
Disable, Enable
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
4.8.28 IP Extension Settings [2-13]
IP-PT network data transmission settings can be programmed. To activate any changes made to settings
on this screen, it is necessary to set all installed IP-EXT cards to OUS, then back to INS.
Gateway Address
Specifies the default gateway address of the network for IP-PTs.
Default
0.0.0.0
Value Range
0.0.0.0–223.255.255.255