4.5 Utility
Feature Guide 333
•Click Skip to continue without backing up.
Select this if you intend to replace the current system data with data that was uploaded from the
PC.
The second screen will be displayed. A list of matching files found on the SD memory card, with dates
and times, is shown at the top.
3. Select whether to replace the DSYS and PMPR files or not.
When no backup file is found, the corresponding options are not available.
4. Click OK.
A confirmation screen will be displayed.
5. Select an option:
•Click OK to reset the PBX.
If OK is clicked, a final confirmation screen will be displayed.
•Click Cancel to return to the main screen without copying files.
6. Click OK to reset the PBX, or Cancel to return to the main screen without copying files.
If the reset command was not carried out correctly, an error message will be displayed, and you will be
returned to the main screen.
After resetting the PBX with this command, it is necessary to reconnect to the PBX to continue
programming.
4.5.18 Utility—Flash ROM ID Information
Displays the Flash ROM ID number pre-assigned to the PBX, used for PBX installation management.
To view the Flash ROM ID
•From the Utility menu, click Flash ROM ID Information.
To Next Page
Loading...
