4.3 Connect
Feature Guide 311
The functions of the buttons on this screen are as follows:
To connect using a modem
1.
From the Connect menu, select Modem.
2. Enter the settings as required, or choose a previously stored profile from the Profile Name drop-down
list.
3. Click OK.
4.3.5 Connect—Disconnect
Closes the connection between the Maintenance Console and the PBX. When this option is chosen, system
data is automatically backed up from the PBX to the SD memory card (see "4.4.1 Tool—SD memory
backup").
To disconnect
1.
From the Connect menu, select Disconnect.
Command – Enter the modem initialize command.
For more details, refer to your modem's
instruction manual.
Dial Number 1-9, 0, *, and # Enter the telephone number to be dialed
to access the PBX.
Dial Type Auto(Tone),
Auto(Pulse), Manual
Specify the outgoing dialing method.
If Manual is chosen, dialing must be
done with a connected telephone.
Password – Enter the password corresponding to the
Programmer Code used to log on to the
Maintenance Console.
Save Password Checked, not checked Select whether to save the password
when the profile is saved.
Comment – Enter a comment to help to identify this
profile.
Button Function
Save Saves the current profile information.
Delete Deletes the current profile information.
New Creates a new, empty profile. Any unsaved modem data currently
being edited is lost.
Initial Sends the value entered in Command to the modem.
OK Begins connection using the modem.
Cancel Closes the current screen without connecting.
Setting Values Description
To Next Page
Loading...
