Panasonic KX-TDA100 Features Guide

4.7 Configuration [1]
Feature Guide 349
Default
30 ms
Value Range
2 × n (n=1–31) ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
SLT Power Supply
Selects the voltage that enables an SLT to activate the Message Waiting lamp. This setting is only available
with MSLC cards.
Default
85 V
Value Range
85 V, 145 V
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
1.17.1 Message Waiting
Optional Equipment
Indicates whether an Extension Caller ID card is mounted on the SLC8 card (reference only). This is only
available with SLC8 cards.
Default
Current status
Value Range
None, Caller ID
Installation Manual References
2.5.6 EXT-CID Card
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards