Panasonic KX-TDA100

4.7 Configuration [1]
Feature Guide 431
Default
Current port number
Value Range
Port number
Feature Guide References
None
Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Use the arrow keys to select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The Cell Station (CS) is in service.
OUS: The CS is out of service.
Fault: The port is not communicating with the CS.
Programming Guide References
4.7.27 CSI/F Port [1-9] Port Command
Feature Guide References
None
CS Name
Specifies the name of the CSIF port.
Default
Not stored.
Value Range
Max. 20 characters
Feature Guide References
None
4.7.27 CSI/F Port [1-9] Port Command
Commands for the CSIF ports can be programmed.