1.22 Portable Station (PS) Features
Feature Guide 173
– Display Language (→ 1.18.4 Display Information)
– ISDN Bearer Mode (→ 1.19.1.1 Integrated Services Digital Network (ISDN)—OVERVIEW)
– Flexible Button Assignment (→ 1.18.2 Flexible Buttons)
– Transfer Recall Destination for Call Transfer and Call Park (The setting assigned to the wired
telephone will first be copied to the PS's extension settings, then can be changed for the PS if
necessary.)
If an extension number is required when changing any PS settings while in Wireless XDP Parallel
mode, use the original extension number assigned to the PS, not the extension number of the paired
(wired) telephone.
• If the Extension Feature Clear is performed, the corresponding extension data for both the wired
telephone and the PS will be cleared. (→ 1.25.2 Extension Feature Clear)
• When a call arrives, both the wired telephone and the PS will ring. However, when one of the following
settings is made, only the telephone which was used to make the setting will ring.
– Automatic Callback Busy
–Transfer Recall
– Hold Recall (→ 1.12.1 Call Hold)
–Call Park Recall
Feature References
1.7.1 Automatic Callback Busy (Camp-on)
1.7.2 Executive Busy Override
1.11.1 Call Transfer
1.12.2 Call Park
1.19.1.2 Calling Line Identification Presentation (CLIP)
Operation References
1.7.11 Wireless XDP Parallel Mode
1.22.4 PS Directory
Description
A portable station (PS) user can make a call or access PBX features using information stored in the PS and
PBX.
Refer to the Operating Instructions supplied with your PS for available directories and usage.
Directory Type Description Programming
PS Dialing Directory A list of names and telephone numbers. Used to
make a call to one of the stored parties.
Stored in the PS by the PS
user.
Quick Dialing A list of frequently dialed feature numbers as well
as names and telephone numbers. Used to quickly
access one of the stored features, or quickly make
a call to one of the stored parties.
Stored in the PS by the PS
user.
To Next Page
Loading...
