Panasonic KX-TDA100

4.7 Configuration [1]
400 Feature Guide
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Programming Guide References
4.7.5 Slot [1-1] LCO Card Property
Feature Guide References
None
Pause Time
Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s , 2.5 s , 3.5 s , 4.5 s
Feature Guide References
None
Flash Time
Specifies the length of a flash signal.
Default
608 ms
Value Range
None, 16 × n (n=1–255) ms
Feature Guide References
None
Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line.
Default
1.5 s