Panasonic KX-TDA100

4.9 Groups [3]
Feature Guide 541
4.9 Groups [3]
4.9.1 Trunk Group—TRG Settings [3-1-1]
CO lines are grouped into CO line groups. The settings of the COline groups determine the settings of their
CO lines. A maximum of 64 CO linegroups can be programmed.
Main
Group Name
Specifies the name of the CO line group for programming reference.As for the available characters, refer to
the character code table describedin section 3.2.1 Installing and Starting KX-TDA Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming Guide References
4.16.1 CO Line Setting [10-1]
Feature Guide References
2.2.2 Group
COS
Specifies the COS of the CO line group that applies when makinga call from a CO line to another CO line
by TIE Line Service.
Default
1
Value Range
1–64
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]
4.16.1 CO Line Setting [10-1]
Feature Guide References
1.27.1.2 PBX Code Method (Access with PBX Code)
1.27.1.3 Extension Number Method (Access without PBX Code)
2.2.2 Group