Panasonic KX-TDA100

4.9 Groups [3]
542 Feature Guide
Line Hunting Order
Specifies the CO line hunting sequence for the CO line group. Thehunting sequence can be programmed
to start from the lowest or highest numberedCO lines, or to rotate uniformly among all CO lines.
Default
High -> Low
Value Range
High -> Low, Low -> High, Rotation
Programming Guide References
4.16.1 CO Line Setting [10-1]
Feature Guide References
1.5.5.3 CO Line Access
2.2.2 Group
DISA Tone Detection—Silence
Enables the disconnection of a DISA-originated CO-to-CO line callby silence detection.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
4.11.3 DISA—System Setting [5-3-1]
4.16.1 CO Line Setting [10-1]
Feature Guide References
1.15.6 Direct Inward System Access (DISA)
2.2.2 Group
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated CO-to-CO line callby continuous signal detection.
Default
Enable
Value Range
Disable, Enable
Programming Guide References
4.11.3 DISA—System Setting [5-3-1]