Panasonic KX-TDA100

4.12 Feature [6]
704 Feature Guide
inter digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. The leading number table used
with each trunk (CO line) group can be specified in Dialing Plan Table in TRG Settings [3-1-1].
Leading Number
Specifies the leading number to be regarded as the beginning of dialing.
Default
No. 1 in Dialing Plan Table 1: N11
No. 2 in Dialing Plan Table 1: NXX NXX XXXX
No. 3 in Dialing Plan Table 1: 1NXX NXX XXXX
Others: Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, N [2,3,4,5,6,7,8,9], P [0, 1], and X [0-9, *, and #])
Programming Guide References
4.8.5 Timers & Counters—CO / Extension [2-4-1]—Analog CO First Digit Timer to Mute Caller's Voice
during Dialing
4.8.5 Timers & Counters—CO / Extension [2-4-1]—Analog CO Inter Digit Timer to Mute Caller's Voice
during Dialing
Feature Guide References
1.19.1.1 Integrated Services Digital Network (ISDN)—OVERVIEW
4.12.10 Dialing Plan [6-7] Auto Assign
It is possible to assign a set of leading numbers automatically.
Select Auto Assigning Table
Selects the set of preset leading number values to assign to the active dialing plan table. When TypeD is
selected, you will be prompted to enter a 3-digit area code, and 7 "X"s, in cells 1 through 47 of the dialing
plan table.
Default
Type A
Value Range
TypeA: 1:N11, 2:NXX XXXX, 3:1NXX NXX XXXX, 4-50: Not stored
TypeB: 1:N11, 2:NNX XXXX, 3:1NPX NXX XXXX, 4-50: Not stored
TypeC: 1:N11, 2:NXX XXXX, 3:1NNX XXXX, 4:1NPX NXX XXXX, 5-50: Not stored
TypeD: 1-47: Not stored, 48:N11, 49:NXX XXXX, 50:1NXX NXX XXXX
TypeE: 1:N11, 2:NXX NXX XXXX, 3:1NXX NXX XXXX, 4-50: Not stored
Programming Guide References
4.12.9 Dialing Plan [6-7]