Panasonic KX-TDA100

1.21 Voice Mail Features
Feature Guide 157
In this example:
A customer dials the telephone number for Company A, "123-4567".
The call is handled by DID distribution according to system programming. (Refer to the above system
programming example, "DID Table".) The tenant number programmed for this DID number determines
that the current time mode is Day (not shown here), and the call is therefore directed to extension 105.
If extension 105 does not answer the call, the call is redirected to extension 100 via Intercept Routing
(not shown here), which is a floating extension number assigned to a VM (DPT) group. When the PBX
redirects the call to the VPS, it also sends the VPS trunk (CO line) group number and tenant number
as programmed in the DID Table.
The VPS answers the call with the greeting message assigned to the trunk (CO line) group number and
current time mode, Company Greeting Number 1. (Refer to the above system programming example,
"Trunk (CO Line) Group Assignment for VPS".)
1
2
3
4
5
6
7
Day
Lunch
Break
Night
Day
Lunch
Break
Trunk (CO Line)
Group No.
Company Greeting No.
1
2
PBX
Tenant 1
123-4567
(Company A)
Tenant 2
(Company B)
CO Line Call
Extn. 105 Extn. 102
VPS
(Floating Extn. No. 100)
Intercept
123-2468
CO Line Call
Sends the following information:
· VPS Trunk (CO Line) Group: 1
· Time mode: Day
Sends the following information:
· VPS Trunk (CO Line) Group: 2
· Time mode: Lunch