Panasonic KX-TDA100 - Page 236

2.2 System Configuration—Software
236 Feature Guide
[Programming Example: Internal Call Block]
In this example:
Internal Call Block is employed to block calls between certain tenants.
Each extension in a tenant is assigned a COS that is not assigned to extensions which belong to
another tenant.
a) Extensions in Tenant 1 are either COS 1 or 2. They can make calls to extensions in Tenants
1, 2, and 3.
b) Extensions in Tenant 2 are either COS 3 or 4. They can make calls to extensions in Tenants
1 and 2, but not 3.
c) Extensions in Tenant 3 are either COS 5 or 6. They can make calls to other extensions in
Tenant 3 only.
Caller
COS 1
COS 2
COS 3
COS 4
COS 5
COS 6
COS 1 COS 2 COS 3 COS 4 COS 5 COS 6
Called Party
Block
Block
Block
Block
Block
Block
Block
Block
Block
Block
Block
Block
COS 6COS 1 COS 2
Extension Group 1
Tenant 1
Extn. 100 Extn. 101
Extension Group 2
Extn. 103Extn. 102
COS 5
Extension Group 5
Tenant 3
Extn. 108 Extn. 109
Extension Group 6
Extn. 111Extn. 110
COS 3 COS 4
Extension Group 3
Tenant 2
Extn. 104 Extn. 105
Extension Group 4
Extn. 107Extn. 106