2.3 System Data Control
Feature Guide 253
2. Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized
for easy use. The numbers should be one digit (0–9, " ", or "#" ) and must not conflict. For a list of the
default settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Incoming Call Queue Monitor
739
739
Hot Line program/set/cancel
740
740
Absent Message set/cancel
750
750
BGM set/cancel
751
751
Remote Wake-up Call
76 76
Timed Reminder set/cancel
760
760
Printing Message
761
761
Extension Lock set/cancel
77
77
Time Service Switch
780
780
Remote Extension Lock off
782
782
Remote Extension Lock on
783
783
NDSS Monitor Release
784
784
Extension Feature Clear
790
790
Extension Personal Identification Number (PIN) set/cancel
799
799
Dial Information (CTI) None None
Other PBX Extension Number (TIE) 01–16 None None
Quick Dialing 1–80 None None
Feature Default
Call Waiting/DND Override 1 or 2*
Executive Busy Override 3
Message Waiting set 4
Call Monitor 5
Automatic Callback Busy 6
Alternate Calling—Ring/Voice
* To use Call Waiting/DND Override, both "1" and "2" are available by default.
Feature Default
Pattern 1
(with )
Pattern 2
(without )
To Next Page
Loading...
