1.1 Incoming Call Features
Feature Guide 33
• Call Waiting Caller ID (Visual Caller ID)
When using the call waiting tone supplied by the telephone company over analog lines, the caller's
telephone number and name can be received. Either the name or the number will flash on the display
for five seconds followed by a 10-second pause, then flash again for five seconds. Note that the
received caller information will not be displayed on telephones or wireless phones connected to SLT
ports.
Feature References
1.7.4 Second Call Notification to Busy Extension
Operation References
1.4.4 Call Waiting
1.7.3 Call Waiting/Off-hook Call Announcement (OHCA)/Whisper OHCA
3.1.2 Settings on the Programming Mode
To Next Page
Loading...
