Panasonic KX-TDA100 - Page 358

4.7 Configuration [1]
358 Feature Guide
Feature Guide References
None
Caller ID—Caller ID (FSK) Detection Start Timer
Specifies the length of time that the PBX waits before detecting Caller ID information, after receiving a call.
To enable this setting, Caller ID Signaling on this screen should be assigned to FSK.
Default
80 ms
Value Range
None, 80 × n (n=1–15) ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Caller ID—Caller ID (FSK) Detection Timer
Specifies the total time required by the PBX to detect Caller ID information. To enable this setting, Caller ID
Signaling on this screen should be assigned to FSK.
Default
2000 ms
Value Range
80 × n (n=13–50) ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Caller ID—Caller ID Header [03]
Selects the type of the 3rd header in a Caller ID signal.
Default
Caller ID
Value Range
DDN, Caller ID