Panasonic KX-TDA100 - Page 361

4.7 Configuration [1]
Feature Guide 361
ISDN CO / QSIG Master / QSIG Slave—T303
Specifies the maximum time the PBX waits for a reply after sending the SETUP (call setting) message to
ISDN.
Default
40 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to the overlap sending.
Default
300 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T305
Specifies the maximum time the PBX waits for a reply after sending the DISC message to ISDN.
Default
300 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None