Panasonic KX-TDA100 - Page 376

4.7 Configuration [1]
376 Feature Guide
Pulse Dial—Pulse % Break
Specifies the % break for pulse digits. This is the ratio between the break signal and make signal in a pulse
dial.
Default
60 %
Value Range
60 %, 67 %
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse Dial—Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Default
Normal
Value Range
Normal, Sweden, New Zealand
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse Dial—Pulse Inter Digit Pause
Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough time
to accept the dialed digits correctly.
Default
830 ms
Value Range
630 ms, 830 ms, 1030 ms
Programming Guide References
4.7.1 Slot [1-1]