Panasonic KX-TDA100 - Page 404

4.7 Configuration [1]
404 Feature Guide
Value Range
Ignore: Ignore the Status Message from the network.
Disconnect: Disconnect the call.
Feature Guide References
None
Line Coding
Selects the line coding type of the PRI PCM (Pulse Code Modulation) for the port.
Default
B8ZS
Value Range
B8ZS, AMI
Feature Guide References
None
Frame Sequence
Selects the type of frame sequence for the port.
Default
Extend Multi frame (EFS)
Value Range
Extend Multi frame (EFS), 4-Frame Multi frame (F4), 12-Frame Multi frame (F12)
Feature Guide References
None
CO Setting
Parameters for CO Setting are not applicable for the PRI extension port.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Feature Guide References
None