Panasonic KX-TDA100

4.7 Configuration [1]
Feature Guide 417
CH
Indicates the channel number (reference only).
Default
Current channel number
Value Range
Channel number
Feature Guide References
None
Connection
Indicates the channel status (reference only).
This column offers two ways to open the screen to select the channel command:
• Click the desired cell in the column.
• Use the arrow keys to select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Programming Guide References
4.7.22 T1 Port [1-7] Channel Command
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Programming Guide References
None