Panasonic KX-TDA100 - Page 428

4.7 Configuration [1]
428 Feature Guide
Feature Guide References
None
DPT Property—VM Port No. (for DPT or S-Hybrid port)
Specifies the VM port number for the port.
Default
1
Value Range
1–12
Feature Guide References
None
Headset OFF/ON (for DPT or S-Hybrid port)
Turns on or off the use of headset with a DPT.
Default
Headset OFF
Value Range
Headset OFF, Headset ON
Feature Guide References
None
Ringing Tone (for DPT, S-Hybrid, or S-Hybrid (XDP) port)
Selects the dual-tone switching pattern of ringing tone for incoming calls. This setting is not available for KX-
T7200, KX-T7451, APT, and SLT.
Default
A
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
Feature Guide References
None