Panasonic KX-TDA100 - Page 436

4.7 Configuration [1]
436 Feature Guide
Default
Current slot number
Value Range
Slot number
Programming Guide References
None
Feature Guide References
1.28.1 IP Proprietary Telephone (IP-PT)
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Programming Guide References
None
Feature Guide References
1.28.1 IP Proprietary Telephone (IP-PT)
Extension Number
Specifies the extension number of the port.
To change the extension number of a wired extension, follow the steps below:
1. Type the new extension number, then click Apply.
2. Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
Starting at 101 (For port 01 of the first extension card that is installed. Extension numbers are preset for
subsequent extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Programming Guide References
None