Panasonic KX-TDA100 - Page 466

4.8 System [2]
466 Feature Guide
Feature Guide References
2.2.4 Time Service
Break
Break start and end times can be programmed for each day of the week for Time Tables that contain breaks.
Break 1, 2, 3 Start—Setting
Enables the setting of each break mode start time.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]
4.9.3 Extension Group [3-2]
Feature Guide References
2.2.4 Time Service
Break 1, 2, 3 Start—Hour
Specifies the hour of each break mode start time.
Default
0
Value Range
0–23
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]
4.9.3 Extension Group [3-2]
Feature Guide References
2.2.4 Time Service
Break 1, 2, 3 Start—Minute
Specifies the minute of each break mode start time.
Default
0