Panasonic KX-TDA100

4.8 System [2]
Feature Guide 519
Default
11
Value Range
1–12
Programming Guide References
None
Feature Guide References
1.17.1 Message Waiting
System CODEC
Selects the CODEC type for DPT and PS.
Default
Mu-Law
Value Range
A-Law, Mu-Law
Feature Guide References
None
Network CODEC
Selects the CODEC type for the ISDN or T1 line.
Default
Mu-Law
Value Range
A-Law, Mu-Law
Feature Guide References
None
Extension Clear : Call Waiting
Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature is performed.
Default
Clear
Value Range
No Clear, Clear