Panasonic KX-TDA100

1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Feature Guide 53
[Button Status—FWD/DND Button]
A FWD/DND button shows the current status as follows:
The status indicated by the "on" and "flashing" patterns can be changed through system programming.
[Button Status—Group FWD Button]
A Group FWD button shows the current status as follows:
[Mode Change]
When either the FWD or DND feature is assigned, pressing the FWD/DND button changes the on/off
setting alternately. When both features are assigned simultaneously, pressing the button changes the
settings as follows:
Note
Pressing the FWD/DND button (fixed button) in idle status will produce one of the following results,
selected through system programming:
When in FWD/DND Setting Mode:
Pressing the button will enter personal programming mode for the FWD/DND setting.
When in FWD/DND Cycle Switch Mode:
Pressing the button will cycle the settings as shown above in [Mode Change].
A FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode,
and the mode cannot be changed.
• When intercom calls are set to be handled differently from CO line calls (forwarding type, forward
destination, DND on/off), we recommend establishing separate buttons for both FWD/DND—Internal
and FWD/DND—External, and/or Group FWD—Internal and Group FWD—External, because:
a) the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed button]) and
the Group FWD—Both button will indicate the setting for either CO line calls or intercom calls, but
not both.
Note
The FWD and DND icons on a PS display reflect the settings for CO line calls only.
b) pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group
FWD—Both button will not change the FWD or DND mode for intercom calls and CO line calls
separately.
Light Pattern Status (default)
Red on DND on
Slow red flashing FWD on
Off FWD/DND off
Light Pattern Status (default)
Slow red flashing FWD on
Off FWD off
FWD DND Off