Panasonic KX-TDA100 - Page 555

4.9 Groups [3]
Feature Guide 555
Value Range
1–8
Programming Guide References
4.8.4 BGM / Music on Hold [2-3]
4.8.8 Time Service—Week Table [2-5-1]
4.12.8 Tenant [6-6]—Music on Hold
Feature Guide References
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain
extensions are restricted as determined by the Internal Call Block feature. Also, when calls are forwarded
or overflowed to a CO line, the TRS assigned for the COS of the incoming call distribution group applies.
Default
1
Value Range
1–64
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]
4.8.16 Class of Service—External Call Block [2-7-2]
4.8.17 Class of Service—Internal Call Block [2-7-3]
Feature Guide References
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW
CLIP on G-DN Button
Specifies the CLIP number sent to the network when making calls using the G-DN button.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Programming Guide References
None
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)