Panasonic KX-TDA100 - Page 579

4.9 Groups [3]
Feature Guide 579
Others—FWD to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to the VPS, so
that the VPS can answer the call either with a mailbox or in the AA service mode. It is also possible to send
no DTMF signal to the VPS.
Default
Answer by Mailbox
Value Range
None, Answer by Mailbox, AA
Programming Guide References
None
Feature Guide References
1.21.3 Voice Mail DTMF Integration
Others—Intercept Routing to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is intercepted to the VPS, so
that the VPS can answer the call either with a mailbox or in the AA service mode. It is also possible to send
no DTMF signal to the VPS.
Default
None
Value Range
None, Answer by Mailbox, AA
Programming Guide References
None
Feature Guide References
1.21.3 Voice Mail DTMF Integration
Others—Mailbox for Extension
Specifies whether the mailboxes use the same numbers as the extensions and incoming call distribution
groups, or use different numbers as programmed for each extension or incoming call distribution group.
Default
Extension Number
Value Range
Extension Number, Programmed Mailbox Number