Panasonic KX-TDA100 - Page 581

4.9 Groups [3]
Feature Guide 581
Group Name
Specifies the name of the VM (DTMF) group, which will be shown on the display of the extension that has
called the VM (DTMF) group. As for the available characters, refer to the character code table described in
section 3.2.1 Installing and Starting KX-TDA Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming Guide References
None
Feature Guide References
1.21.1 Voice Mail (VM) Group
Type
Specifies the initial service mode in which the VPS answers calls.
Default
AA
Value Range
AA, VM
Programming Guide References
None
Feature Guide References
1.21.3 Voice Mail DTMF Integration
Extension Number of the SLT Port Connected to VM 1–32
Specifies the extension number of the SLT ports that belongs to the VM (DTMF) group.
To assign an extension port to a VM (DTMF) group, follow the steps below:
1. Type the extension number of the SLT port that belongs to the VM (DTMF) group.
2. Set the status of the extension port to "OUS", then "INS".
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)