Panasonic KX-TDA100 - Page 613

4.10 Extension [4]
Feature Guide 613
FWD / DND Reference
Call Forwarding (FWD) and Do Not Disturb (DND) settings for each extension can be referred. FWD and
DND settings can be programmed separately for each extension in Wired Extension—FWD/DND [4-1-2].
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Programming Guide References
4.7.23 Extension Port [1-8]
Feature Guide References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1. Type the new extension number, then click Apply.
2. Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.