Panasonic KX-TDA100

4.10 Extension [4]
656 Feature Guide
Beginning Entry Location (Ext. Number)
Specifies the extension number of the first location to be programmed.
Default
Not stored.
Value Range
PS extension number
Programming Guide References
4.10.9 Portable Station—Extension Settings [4-2-1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
Number to Generate
Specifies the number of locations to be programmed.
A CLIP number will only be assigned to registered PS extensions, even if the number entered here is larger
than the total number of PS extensions.
Default
128
Value Range
1–total number of connected wired extensions
Programming Guide References
4.10.9 Portable Station—Extension Settings [4-2-1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
Deleting Digits
Specifies the number of digits to be deleted from the start of an extension number when using it as part of
the CLIP number.
Default
0
Value Range
0–4
Programming Guide References
4.10.9 Portable Station—Extension Settings [4-2-1]