Panasonic KX-TDA100

4.16 CO & Incoming Call [10]
736 Feature Guide
DID Destination—Day, Lunch, Break, Night
Specifies the DID destination in each time mode.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9): For the extension number of the own PBX
Max. 5 digits (consisting of 0–9): For the extension number of the other PBX
Programming Guide References
4.8.12 Numbering Plan—Other PBX Extension [2-6-3]
4.16.4 DID Table [10-3] Automatic Registration
Feature Guide References
1.1.1.3 Direct Inward Dialing (DID)
1.27.1 TIE Line Service
Tenant Number
Specifies the tenant number to determine the Time Table by which calls are distributed depending on the
time of the day.
Default
1
Value Range
1–8
Programming Guide References
None
Feature Guide References
1.1.1.3 Direct Inward Dialing (DID)
VM Trunk Group No.
Specifies the number of the VPS trunk (CO line) group sent to the VPS when the DID destination is the
floating extension number of a VM (DPT) Group.
The VPS trunk (CO line) group number is used to send the applicable company greeting message of the
VPS to the caller.
Default
1
Value Range
1–48