Value Range 1424–49150 (even number only)
Note
• The value for this setting must be greater than or equal to
"[Minimum RTP Port Number] + 400".
• Changing this setting may affect the number of simultaneous
calls that can be made. Therefore, when setting this parameter,
be aware that the maximum number of necessary ports can be
calculated as shown below:
No. of lines ´ No. of channels ´ 2 ´ 10 (No. of terminals)
Default Value 20000
Configuration File Reference RTP_PORT_MAX (Page 204)
Telephone-event Payload Type
Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This setting is available only when [DTMF Type] is set to
[Outband].
Value Range 96–127
Default Value 101
Configuration File Reference TELEVENT_PAYLOAD (Page 206)
Document Version 2011-06 Administrator Guide 103
4.5.3 VoIP Settings
To Next Page
Loading...
