Panasonic KX-UT133-B - Reorder Tone; Tone Frequencies; Tone Timings; Telephone Settings

Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Configuration File Reference DIAL_TONE4_TIMING (Page 187)
4.6.4.5 Reorder Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 480,620
Configuration File Reference REORDER_TONE_FRQ (Page 189)
Tone Timings
Description Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,250,190
Configuration File Reference REORDER_TONE_TIMING (Page 189)
4.6.5 Telephone Settings
This screen allows you to configure various telephone settings.
Document Version 2011-06 Administrator Guide 125
4.6.5 Telephone Settings