Description Specifies whether to enable DST (Summer Time).
Note
• This parameter is disabled when the
"LOCAL_TIME_ZONE_POSIX" parameter is specified.
Value Range
• Y (Enable DST [Summer Time])
• N (Disable DST [Summer Time])
Default Value
N
Web User Interface Reference Enable DST (Enable Summer Time) (Page 88)
DST_OFFSET
Value Format Integer
Description Specifies the amount of time, in minutes, to change the time when
"DST_ENABLE" is set to "Y".
Note
• This parameter is disabled when the
"LOCAL_TIME_ZONE_POSIX" parameter is specified.
Value Range 0–720
Note
• This parameter is usually set to "60".
Default Value 60
Web User Interface Reference DST Offset (Summer Time Offset) (Page 88)
DST_START_MONTH
Value Format Integer
Description Specifies the month in which DST (Summer Time) starts.
Note
• This parameter is disabled when the
"LOCAL_TIME_ZONE_POSIX" parameter is specified.
Value Range 1–12
Default Value 3
Web User Interface Reference Month (Page 88)
DST_START_ORDINAL_DAY
Value Format Integer
Document Version 2011-06 Administrator Guide 151
5.3.2 System Time Settings