Panasonic KX-UT133-B - DNS Settings; Dns_Qry_Prll; Dns_Priority

Description Specifies the IP address of the secondary DNS server.
Note
• This setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Unit (Page 17)
Web User Interface Reference DNS2 (Page 74)
5.4.2 DNS Settings
DNS_QRY_PRLL
Value Format Boolean
Description Specifies the DNS query method as parallel or sequential.
Value Range
• Y (Parallel)
• N (Sequential)
Note
• If set to "Y", the unit sends out all DNS queries at the same time.
The first DNS reply will be accepted and used by the unit.
• If set to "N", the unit sends DNS queries sequentially.
The unit sends a request to the DNS server with the highest
priority for a preprogrammed time period (5 seconds). When the
timer expires, the unit sends a request to the DNS server with
the second priority.
Default Value
Y
DNS_PRIORITY
Value Format Boolean
Description Specifies the priority of the DNS server.
Value Range
• Y ("DNS1_ADDR" and "DNS2_ADDR" have first priority.)
• N ("DNS1_ADDR" and "DNS2_ADDR" have no priority.)
Note
• If set to "Y", the DNS servers specified in "DNS1_ADDR" and
"DNS2_ADDR" will be queried first. If the queries fail, the DNS
server specified by the user (DHCP or static) will be queried.
• If set to "N", the DNS server specified by the user (DHCP or
static) will be queried first. If the query fails, the DNS servers
specified in "DNS1_ADDR" and "DNS2_ADDR" will be queried.
Document Version 2011-06 Administrator Guide 171
5.4.2 DNS Settings