Panasonic KX-UT133-B - Bell_Core_Pattern4_Timing; Bell_Core_Pattern5_Timing; Telephone Settings; Display_Name_Replace

Description Specifies the cadence, in milliseconds, of pattern ID 3, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Default Value 400,200,400,200,800,4000
BELL_CORE_PATTERN4_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 4, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Default Value 300,200,1000,200,300,4000
BELL_CORE_PATTERN5_TIMING
Value Format Integer
Description Specifies the cadence, in milliseconds, of pattern ID 5, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Default Value 500
5.5.3 Telephone Settings
DISPLAY_NAME_REPLACE
Value Format Boolean
Description Specifies whether the name saved in the phonebook is used in place
of the name display if a matching entry is found.
Value Range
• Y (Enable Display Name Replace)
• N (Disable Display Name Replace)
Default Value
Y
NUMBER_MATCHING_LOWER_DIGIT
Value Format Integer
194 Administrator Guide Document Version 2011-06
5.5.3 Telephone Settings