Panasonic KX-UT133-B - SIP Settings; Sip_User_Agent; Phone_Number_N; Sip_Uri_N

5.7.2 SIP Settings
SIP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference SIP User Agent (Page 91)
PHONE_NUMBER_n
Parameter Name Example PHONE_NUMBER_1, PHONE_NUMBER_2, …, PHONE_NUMBER_4
Value Format String
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
• When registering using a user ID that is not a phone number,
you should use the "SIP_URI_n" setting.
Value Range Max. 32 characters
Default Value Empty string
Web User Interface Reference Phone Number (Page 93)
SIP_URI_n
Parameter Name Example SIP_URI_1, SIP_URI_2, …, SIP_URI_4
Value Format String
212 Administrator Guide Document Version 2011-06
5.7.2 SIP Settings