"Embedded web" on the unit (® see Opening/Closing the Web Port in 1.1.6.3 Before Accessing
the Web User Interface).
4.3.1.1 Connection Mode
Connection Mode
Description Selects whether to assign the IP address automatically (DHCP) or
manually (static).
Value Range
• DHCP
• Static
Default Value DHCP
Phone User Interface
Reference
Configuring Settings from the Unit (Page 17)
Configuration File Reference CONNECTION_TYPE (Page 168)
4.3.1.2 DHCP Settings
Host Name
Description Specifies the host name for the unit to send to the DHCP server.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Document Version 2011-06 Administrator Guide 71
4.3.1 Basic Network Settings
To Next Page
Loading...
