Panasonic KX-UT133-B - Syslog Settings; Syslog_Event_Sip; Syslog_Event_Cfg

Description Specifies a IEEE 1003.1 (POSIX)-compliant local time zone definition
(e.g., "EST+5 EDT,M4.1.0/2,M10.5.0/2").
Note
• If this parameter is specified, the following parameters are
disabled, and operation will be based on this parameter.
– TIME_ZONE
– DST_ENABLE
– DST_OFFSET
– DST_START_MONTH
– DST_START_ORDINAL_DAY
– DST_START_DAY_OF_WEEK
– DST_START_TIME
– DST_STOP_MONTH
– DST_STOP_ORDINAL_DAY
– DST_STOP_DAY_OF_WEEK
– DST_STOP_TIME
Value Range Max. 70 characters
Default Value Empty string
5.3.3 Syslog Settings
SYSLOG_EVENT_SIP
Value Format Integer
Description Specifies which SIP-related syslog events are sent to the syslog server.
Note
• If the level of the event is higher than or equal to the set value,
the log is sent to the syslog server.
• This setting is not applicable for the current version. No logs will
be sent to the syslog server, even if values "1–6" are specified.
Value Range 0–6
– 0: no logs sent
– 1: emergency (highest)
– 2: alert
– 3: critical
– 4: error
– 5: warning
– 6: information (lowest)
Default Value 0
SYSLOG_EVENT_CFG
Value Format Integer
Document Version 2011-06 Administrator Guide 155
5.3.3 Syslog Settings